This Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit with auto-detect SDI inputs for SD / HD /3G / 6G / 12G to easily transport up to 2 SDI sources over a single fiber. These plug and play devices can be up and running within a few minutes to assist popular applications like Live Sports, Stadiums, Live Theater, Government, Education/ University, Racing, and any other project that requires 1ms to transport Live Video with embedded audio on the SDI feed. The transmitter has a loop-out for each SDI input and the Receiver has dual output for every input. Elegant solution for transporting your SDI video via ST/PC over one single mode fiber.
The most powerful Thor Fiber SDI Transmitter provides one SDI input and one SDI loopout, and the Receiver provides two SDI outputs. Utilizing single mode fiber, this multirate Ultra High Definition Tx & Rx set has zero delay to perform under the most critical applications in real world conditions.
This unit provides transparent and lossless transmission technology, which ensures that the quality of video is up to broadcast level PRO-DVB, and also guarantees the normal transmission of embedded audio signals. It can be widely used in 4K/8K ultra high-definition TV program production, live broadcast of large-scale concert or Sports, Racing, or Theatre events.
12G-SDI solutions can simplify production and post workflows, providing bandwidth to handle high resolution, high frame rate and deep color content over a single cable, by directly connect camera to fiber.
12G SDI EFP fiber transmission system is plug-and-play and has an ST/PC optical connector which requires 1 Single Mode Fiber for 10km (default) distance; can be upgraded to long haul.
Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit Features:
- Supports SDI (12G), (6G), (3G), (HD), (SD); and compatible with DVB-ASI and AES10 (MADI)
- Both transmitter and receiver have clock recovery function; (clock restorer can reduce high frequency jitter and completely regenerate data with pure low jitter clock)
- The clock restorer is locked to 11.88Gbps, 5.94Gbps, 2.97Gbps, 1.485Gbps or 1.001 frequency division sub rate and SMPTE rate of 270Mbps;
- Signal input has automatic cable equalization (EQ) functionality
- 1/4 hot shoe screw
- Plug and play SFP optical module, which can replace optical module corresponding to different distances or interfaces according to the application
- Single-mode single-fiber transmission distance 10km (default)
- Status light display;
- Plug and play, auto-detect SDI interfaces & resolutions
Why not buy this Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit from HDTV Supply today?
Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit Specification:
| Wavelength | 1310nm / CWDM |
| Rate | 12Gbps |
| Transmitter power | 0~ -3dB |
| Receiver sensitivity | -12dB |
| Fiber connector | ST/PC |
| Standard Optical Distance | ~10km |
| Number of input | 2 SDI inputs (model dependent) |
| Local loop out | 1 Channel SDI per input source |
| Protocol standard | SMPTE ST-2082 |
| SMPTE rate | 270Mbps / 1.48Gbps / 2.97GBps / 5.54Gbps / 11.88Gbps |
| Video Input options | SD-SDI 480i, 576i ED-SDI 480p, 576p HD-SDI 720p, 1080i 3G-SDI 1080P 60Hz 6G-SDI 2160p 30Hz 12G-SDI 2160p 60Hz |
| EQ Mode Cable Transmission Distance |
75m at 11.88Gbps |
| Signal Amplitude |
800mV +-10% |
| Impedance | 75ohm |
| Connector | BNC |
| Input Power | AC 90~240V |
| Net Weight | 3kg |
| Size | 1RU 440 x 230 x 44.5mm |
| Working Temp | -20C to +75C |
| Storage Temp | -40C to +85C |
| Relative Humidity | 5 to 95% non-condensing |
| MTBF | >10,000 hours |
Why not buy this Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit from HDTV Supply today?
Thor Broadcast F-12G-2SDI-CWDM-TX/RX User Manual
Why not buy this Thor Broadcast F-12G-2SDI-CWDM-TX/RX 2-Ch 12G / 6G / 3G / HD /SD-SDI optical CWDM Tranmsitter /Receiver Kit from HDTV Supply today?
What fiber connector and single‑mode distance does the kit use by default?
A: It uses an ST/PC connector on single‑mode fiber with a standard optical distance of about 10 km by default.
Can I change the optical reach or interface with different modules?
A: Yes; the optical module is a plug‑and‑play SFP that can be replaced to match different distances or interfaces.
Does the product perform SDI clock recovery and what rates does it lock to?
A: Yes; both transmitter and receiver include clock recovery (a clock restorer) and it locks to 11.88Gbps, 5.94Gbps, 2.97Gbps, 1.485Gbps or 270Mbps SMPTE subrates.
What cable equalization and copper SDI distances are supported per rate?
A: The unit provides automatic cable equalization, supporting up to 75 m at 11.88 Gbps, 120 m at 5.94 Gbps, 200 m at 2.97 Gbps, 300 m at 1.485 Gbps and 600 m at 270 Mbps.
What are the SDI signal amplitude, impedance and connector type?
A: SDI signal amplitude is 800 mV ±10%, impedance is 75 ohm, and the SDI connectors are BNC.
What are the unit size and weight for rack planning?
A: The unit is 17.32 x 9.06 x 1.75 inches (17.32 x 9.06 x 1.75 inches) and weighs 6.61 pounds (6.61 pounds).
Can this kit transport two SDI sources over a single fiber?
A: Yes; the kit is designed to transport up to two SDI sources over a single single‑mode fiber.
Is the system truly plug‑and‑play and will it auto‑detect SDI interfaces and resolutions?
A: Yes; the kit is described as plug‑and‑play and auto‑detects SDI interfaces and resolutions.
Does the receiver provide a local SDI loop‑out so I can feed a local monitor?
A: Yes; each transmitter input includes a local loop‑out and the receiver provides dual outputs per input for local or downstream monitoring.
Will this kit handle embedded audio on the SDI feed?
A: Yes; the product states it provides transparent, lossless transmission and guarantees normal transmission of embedded audio carried on the SDI feed.