This Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable come in a kit (Tx & Rx) and are standard configuration Fiber Optic Transmitter and Receivers for Serial Digital signals up to 3G-SDI running at 3.0 Gbps. This system can be ordered with any standard CWDM optics package, and internal passives are available by request. This is an 1 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol. Easy to read LED indicators for Input Signal Detect and optical link are present for all channels. Units come standard with ST/PC fiber connectors and a 1RU 19" rackmount form factor to keep your rack clean. Simplified easy to use plug and play units mean that anyone can deploy these in no time. Commercial grade intricate parts means these will work for years without hassle, backed by Thor Fiber's 2 year warranty and free tech support means a stress free guarantee.
Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Features:
- Compatible with any Serial Digital Signal up to 3.0 Gbps
- Available with internal optics for use with a single optical fiber
- Standardized channels for both CWDM bands for compatibility with Python systems
- Passes SDI embedded audio and all ancillary data
- Input equalization and reclocking for SDI video on buffered outputs
- Available in any custom configuration for Bi-Directional Transport up to 16 total channels
- Real-time status LED indicators for troubleshooting and monitoring
- DWDM systems available by request for higher density systems
Why not buy this Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Specification:
| *All Specifications Subject to Change Without Notice | |||
|
Optical Characteristics |
|
||
|
1310 nm CWDM Band *Other Wavelengths Available By Request |
||
|
Single Mode or Multi Mode FOC | ||
|
Up to 4.25 Gbps (Model Specific) | ||
|
DFB Laser Module - CWDM | ||
|
25 dB - Standard 35 dB - Long Range |
||
|
ST/PC - Standard | ||
|
|||
|
Input |
Any Serial Digital Signal up to 3.0 Gbps | ||
|
1.00 V Peak to Peak | ||
|
75 Ohm | ||
|
BNC - 75 Ohm | ||
|
Mechanical/Environmental |
|||
|
480mm x 225mm x 88mm | ||
|
8-15lb - Depending On Configuration | ||
|
Operating: -10C to + 55C Storage: -30C to + 70C |
||
|
0 to 95%, non-condensing | ||
|
100 - 240 VAC Auto Switching PSU 10 - 30 Watt Depending On Configuration |
||
Why not buy this Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Thor Broadcast F-1SDI-3G-TxRx-RM Data Sheet
How to Connect HDMI RF Petit to PC Via Ethernet
Why not buy this Thor Broadcast F-1SDI-3G-TxRx-RM 1 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Will this unit accept any Serial Digital (SDI) signal format?
A: Yes — the device accepts any Serial Digital signal up to 3.0 Gbps and automatically adjusts to the input signal type.
What fiber connector does the kit use?
A: The units come standard with ST/PC fiber connectors.
Does the system pass SDI embedded audio and ancillary data?
A: Yes — it passes SDI embedded audio and all ancillary data.
Does the device provide input equalization and reclocking on outputs?
A: Yes — the product provides input equalization and reclocking for SDI video on buffered outputs.
Is this sold as a transmitter-and-receiver kit?
A: Yes — the product comes in a kit that includes both a transmitter (Tx) and receiver (Rx).
What optical data rates and sources are mentioned for this model?
A: The optical data rate is listed up to 4.25 Gbps (model specific) and the optical source is a DFB laser module for CWDM.
Can this system be ordered for higher channel density or DWDM?
A: Yes — DWDM systems and custom higher-density configurations are available by request.
What optical budget options are documented?
A: Two optical budget levels are documented: 25 dB standard and 35 dB long range.
What form factor does the product use for rack installation?
A: The units use a 1RU 19" rackmount form factor.
Do I need to configure or manage the transceiver after installation?
A: No — no configuration or management is needed; the system automatically adjusts to the input signal type.
What fiber types can I use with this unit?
A: You can use single-mode or multi-mode fiber cable as listed for the product.
How does the unit indicate link and signal status?
A: Real-time, easy-to-read LED indicators show Input Signal Detect and the optical link status.
Is this product rated for outdoor temperatures or humidity?
A: The documented operating temperature range is -10°C to +55°C and it supports 0 to 95% non-condensing humidity for storage and operation as specified.
Does the unit support bi-directional transport or multiple channels?
A: Yes — the product can be configured for bi-directional transport and is available in custom configurations up to 16 total channels.