This Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable come in a kit (Tx & Rx) and are standard configuration Fiber Optic Transmitter and Receivers for Serial Digital signals up to 3G-SDI running at 3.0 Gbps. This system can be ordered with any standard CWDM optics package, and internal passives are available by request. This is a 8 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol. Easy to read LED indicators for Input Signal Detect and optical link are present for all channels. Units come standard with ST/PC fiber connectors and a 1RU 19" rackmount form factor to keep your rack clean. Simplified easy to use plug and play units mean that anyone can deploy these in no time.
Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Features:
- Compatible with any Serial Digital Signal up to 3.0 Gbps
- Available with internal optics for use with a single optical fiber
- Standardized channels for both CWDM bands for compatibility with Python systems
- Passes SDI embedded audio and all ancillary data
- Input equalization and reclocking for SDI video on buffered outputs
- Available in any custom configuration for Bi-Directional Transport up to 16 total channels
- Real-time status LED indicators for troubleshooting and monitoring
- DWDM systems available by request for higher density systems
Why not buy this Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Specification:
| *All Specifications Subject to Change Without Notice | |||
|
Optical Characteristics |
|
||
|
1310 nm CWDM Band *Other Wavelengths Available By Request |
||
|
Single Mode or Multi Mode FOC | ||
|
Up to 4.25 Gbps (Model Specific) | ||
|
DFB Laser Module - CWDM | ||
|
25 dB - Standard 35 dB - Long Range |
||
|
ST/PC - Standard | ||
|
|||
|
Input |
Any Serial Digital Signal up to 3.0 Gbps | ||
|
1.00 V Peak to Peak | ||
|
75 Ohm | ||
|
BNC - 75 Ohm | ||
|
Mechanical/Environmental |
|||
|
480mm x 225mm x 88mm | ||
|
8-15lb - Depending On Configuration | ||
|
Operating: -10C to + 55C Storage: -30C to + 70C |
||
|
0 to 95%, non-condensing | ||
|
100 - 240 VAC Auto Switching PSU 10 - 30 Watt Depending On Configuration |
||
Why not buy this Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Thor Broadcast F-8SDI-3G-TxRx-RM Data Sheet
How to Connect HDMI RF Petit to PC Via Ethernet
Why not buy this Thor Broadcast F-8SDI-3G-TxRx-RM 8 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?
Will this system pass SDI embedded audio and ancillary data over the fiber link?
A: Yes; the product passes SDI embedded audio and all ancillary data over the fiber link.
Does the transmitter/receiver auto-adjust to different SDI bit rates and protocols?
A: Yes; the system automatically adjusts to any input signal type regardless of bit rate or protocol, so no manual configuration is required for different SDI rates up to its supported limit.
What fiber connector type does the kit use by default?
A: The units come standard with ST/PC fiber connectors.
Does the product include SDI input equalization and reclocking on its outputs?
A: Yes; the product provides input equalization and reclocking for SDI video on buffered outputs.
What optical budget options are provided for link planning?
A: The product lists a standard optical budget of 25 dB and a long-range option of 35 dB for link planning.
Is CWDM supported and can DWDM density be requested?
A: Yes; the product uses standardized channels for CWDM and DWDM systems are available by request for higher density deployments.
What optical data rate limits are documented for the product?
A: The product notes optical data rates up to 4.25 Gbps for model-specific configurations while SDI inputs are compatible up to 3.0 Gbps.
Is this a rack-mountable unit and what rack size does it use?
A: Yes; the units are rack-mountable and are provided in a 1RU 19" rackmount form factor.
Can I deploy this kit without any configuration or management steps?
A: Yes; the kit requires no configuration or management because it automatically adjusts to the input signal type and bit rate.
Will this kit support long-haul links such as a 40 km installation?
A: Possibly; the product is described as an 8 channel system based on a standard 40km platform, but actual reach will depend on optics and configuration choices.
Will the BNC/75 ohm SDI outputs match standard 75-ohm SDI cabling and connectors?
A: Yes; the product specifies 75 Ohm I/O impedance and uses BNC 75 Ohm electrical connectors for SDI connections.