Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber

Thor Broadcast

Was: $3,594.00
Now: $2,995.00
SKU:
Thor-F-2SDI-3G-TxRx-RM
Condition:
New
Availability:
In Stock
1:
SD/HD 3G-SDI Over Single Fiber
2:
Available with Internal Optics
3:
Passes SDI Embedded Audio
4:
Real-Time Status LED Indicators
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty
ADD OPTIONS:

This Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable come in a kit (Tx & Rx) and are standard configuration Fiber Optic Transmitter and Receivers for Serial Digital signals up to 3G-SDI running at 3.0 Gbps. This system can be ordered with any standard CWDM optics package, and internal passives are available by request. This is a 2 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol. Easy to read LED indicators for Input Signal Detect and optical link are present for all channels. Units come standard with ST/PC fiber connectors and a 1RU 19" rackmount form factor to keep your rack clean. Simplified easy to use plug and play units mean that anyone can deploy these in no time.

Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Features:

  • Compatible with any Serial Digital Signal up to 3.0 Gbps
  • Available with internal optics for use with a single optical fiber
  • Standardized channels for both CWDM bands for compatibility with Python systems
  • Passes SDI embedded audio and all ancillary data
  • Input equalization and reclocking for SDI video on buffered outputs
  • Available in any custom configuration for Bi-Directional Transport up to 16 total channels
  • Real-time status LED indicators for troubleshooting and monitoring
  • DWDM systems available by request for higher density systems

Why not buy this Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?

Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Specification:

*All Specifications Subject to Change Without Notice

Optical Characteristics

 

  • Wavelength

1310 nm CWDM Band
1271nm, 1291nm, 1311nm, 1331nm
1351nm, 1371nm, 1411nm, 1431nm
1550 nm CWDM Band
1471nm, 1491nm, 1511nm, 1531nm
1551nm, 1571nm, 1591nm, 1611nm

*Other Wavelengths Available By Request
*DWDM up to 160 Ch/Fiber By Request

  • Fiber Cable
Single Mode or Multi Mode FOC
  • Optical Data Rate
Up to 4.25 Gbps (Model Specific)
  • Optical Source
DFB Laser Module - CWDM
  • Optical Budget
25 dB - Standard
35 dB - Long Range
  • Fiber Connectors
ST/PC - Standard
  • Electrical Characteristics
 

Input

Any Serial Digital Signal up to 3.0 Gbps
  • Input Level
1.00 V Peak to Peak
  • I/O Impedance
75 Ohm
  • Electrical Connectors
BNC - 75 Ohm

Mechanical/Environmental

 
  • Dimensions (L x W x H)
480mm x 225mm x 88mm
  • Weight
8-15lb - Depending On Configuration
  • Temperature Range
Operating: -10C to + 55C
Storage: -30C to + 70C
  • Humidity Range
0 to 95%, non-condensing
  • Power
100 - 240 VAC Auto Switching PSU
10 - 30 Watt Depending On Configuration

Why not buy this Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?

Thor Broadcast F-2SDI-3G-TxRx-RM Data Sheet

How to Connect HDMI RF Petit to PC Via Ethernet

Why not buy this Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable today?

Will this unit carry SDI audio and ancillary data in the SDI stream?

A: Yes; the system passes SDI embedded audio and all ancillary data over the fiber link.

Can I use single fiber for both channels and choose CWDM wavelengths?

A: Yes; units are available with internal optics for use with a single optical fiber and can be ordered with standard CWDM optics.

How does the product handle incoming SDI signal conditioning on the electrical outputs?

A: The device provides input equalization and reclocking and outputs buffered SDI video.

Are there front‑panel status indicators for link and signal monitoring?

A: Yes; each channel has easy‑to‑read LEDs for Input Signal Detect and optical link status.

What platform distance is this 2‑channel kit based on?

A: The 2‑channel system is based on a standard 40 km platform.

Can the system be configured for bi‑directional transport or higher channel counts?

A: Yes; it’s available in custom configurations for bi‑directional transport up to 16 total channels, and DWDM is available by request for higher density.

What physical form factor and rack size does the kit use?

A: The units use a 1 RU 19" rackmount form factor.

What optical wavelengths are available for CWDM on this product?

A: Standard CWDM band wavelengths are listed across the 1310 nm and 1550 nm bands and the product can be ordered with other wavelengths by request.

How big is the rack unit and what are the unit dimensions in inches?

A: The rack unit is 1 RU and the enclosure measures 18.90" x 8.86" x 3.46" (L x W x H).

What weight should I plan for in rack planning?

A: Plan for a unit weight between 8 and 15.00 pounds depending on configuration.

Why not buy this Thor Broadcast F-2SDI-3G-TxRx-RM 2 Ch SD/HD 3G-SDI Over Single Fiber from HDTV Supply today?