This Thor Broadcast F-4SDI-B-3G-TxRx-RM 4-Ch Bidirectional SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable are standard configuration Fiber Optic Transmitter and Receivers for Serial Digital signals up to 3G-SDI running at 3.0 Gbps. This system can be ordered with any standard CWDM optics package, and internal passives are available by request. This is a 4 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol.
Easy to read LED indicators for Input Signal Detect and optical link are present for all channels. Units come standard with ST/PC fiber connectors and a 1RU 19" rackmount form factor to keep your rack clean. Simplified easy to use plug and play units mean that anyone can deploy these in no time. Commercial grade intricate parts means these will work for years without hassle, backed by a 2-year manufacturer warranty and free tech support means a stress free guarantee.
Thor part number F-xSDI-Tx/Rx designates a fiber optic transmitter or receiver used to transport serialized digital signals up to 3.0 Gbps. Any channel configuration up to 16 channels per fiber can be designated by value "x". Units can be configured to transport any number of SDI channels in either direction up to a total of 16 per fiber. For even higher densities, DWDM systems are available by request.
Thor uses high quality DFB lasers for maximum reliability and distance, with off the shelf models functioning up to 50km when used with single mode fiber. F-SDI systems will transport any digital signal from 1 Mbps to 3.0 Gbps independent of protocol or standard. These systems can be used for anything from 3G-SDI (SMPTE 424M) to multi rate DVB-ASI down to single program at low bit rates. F-SDI units incorporate industry standard internal CWDM modules for compatibility with similar systems from other manufacturers, such as Python systems.
This standardization allows Thor F-SDI equipment to be used in conjunction with other commercial off the shelf transmitters or receivers from other vendors, including Python series equipment. All outputs are automatically re clocked to eliminate problems with jitter and to allow for long cable runs out of the receiver. Applications range from live broadcast and Electronic News Gathering to government and scientific research applications. Contact a Thor Sales Representative today for more information on system design and equipment compatibility.
Thor Broadcast F-4SDI-B-3G-TxRx-RM 4-Ch Bidirectional SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Features:
- Compatible with any Serial Digital Signal up to 3.0 Gbps
- Available with internal optics for use with a single optical fiber
- Standardized channels for both CWDM bands for compatibility with Python systems
- Passes SDI embedded audio and all ancillary data
- Input equalization and reclocking for SDI video on buffered outputs
- Available in any custom configuration for Bi-Directional Transport up to 16 total channels
- Real-time status LED indicators for troubleshooting and monitoring
- DWDM systems available by request for higher density systems
Why not buy this Thor Broadcast F-4SDI-B-3G-TxRx-RM 4-Ch Bidirectional SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable from HDTV Supply today?
Thor Broadcast F-4SDI-B-3G-TxRx-RM 4-Ch Bidirectional SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable Specification:
| *All Specifications Subject to Change Without Notice | |||
| Optical Characteristics |
|
||
|
1310 nm CWDM Band *Other Wavelengths Available By Request |
||
|
Single Mode or Multi Mode FOC | ||
|
Up to 4.25 Gbps (Model Specific) | ||
|
DFB Laser Module - CWDM | ||
|
25 dB - Standard 35 dB - Long Range |
||
|
ST/PC - Standard | ||
| Electrical Characteristics | |||
|
Any Serial Digital Signal up to 3.0 Gbps | ||
|
1.00 V Peak to Peak | ||
|
75 Ohm | ||
|
BNC - 75 Ohm | ||
| Mechanical/Environmental | |||
|
19" x 10" x 1.75" - 1U 19" rack mountable | ||
|
15lb - (TX+RX kit) | ||
|
Operating: -10C to + 55C Storage: -30C to + 70C |
||
|
0 to 95%, non-condensing | ||
|
100 - 240 VAC Auto Switching PSU 10 - 30 Watt Depending On Configuration |
||
Why not buy this Thor Broadcast F-4SDI-B-3G-TxRx-RM 4-Ch Bidirectional SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable from HDTV Supply today?
Is this a bidirectional system and how many SDI channels does the unit handle?
A: The listed model is a 4‑channel bidirectional system, and units can be configured to transport up to 16 total SDI channels per fiber.
Does this product use CWDM and work with other CWDM systems like Python?
A: Yes — it uses internal CWDM modules and standardized CWDM channels for compatibility with similar systems such as Python series equipment.
What fiber connector type comes standard on this unit?
A: The units come standard with ST/PC fiber connectors.
Will this transport SDI embedded audio and ancillary data?
A: Yes — the product passes SDI embedded audio and all ancillary data.
Does the receiver provide input equalization and reclocking for SDI outputs?
A: Yes — the product offers input equalization and reclocking on buffered SDI outputs.
What is the device form factor and rack size?
A: The unit is a 1U, 19" rack‑mountable module with dimensions 19" x 10" x 1.75".
Are there front‑panel LEDs or status indicators for the optical link and signal detect?
A: Yes — easy to read LEDs indicate input signal detect and the optical link for all channels.
Can I use single‑mode or multi‑mode fiber with this system?
A: Yes — the product supports either single‑mode or multi‑mode fiber.
How far will a standard system transmit over fiber?
A: The product is described as a standard 40km platform, and off‑the‑shelf models using single‑mode fiber are stated to function up to 50km.
What AC power does this unit accept and does power consumption vary?
A: The unit accepts 100–240 VAC via an auto‑switching PSU, and power consumption is listed as 10–30 watts depending on configuration.
Will the receiver outputs be reclocked so I can run long coax cable out of the receiver?
A: Yes — outputs are automatically reclocked and buffered to help eliminate jitter for long cable runs from the receiver.