Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI Transmission Kit

Thor Broadcast

Was: $7,194.00
Now: $5,995.00
SKU:
Thor-F-M8SD-ET-TxRx
Condition:
New
Availability:
In Stock
1:
Supports 8 Full HD-SDI @ 1.5Gbps
2:
Transport 10/100 Ethernet Full Duplex
3:
Transports Embedded Audio Channels
4:
Link Alarm Indicators
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty

This Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each and 10/100 Ethernet Full-Duplex over a single strand of fiber cable up to 20/40 or 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422/485 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI-ET platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment.

Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with TDM technology.

Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit Features:

  • Supports 8 Full HD-SDI @ 1.5Gbps or lower SDI digital video
  • Transport 10/100 Ethernet full duplex at the same time so it works as an ethernet fiber optic tranceiver-extender
  • Transports embedded audio channels as well as SDI ancillary data
  • Return path serial RS-485 channel for controlling equipment on Tx end
  • Link alarm indicators on both Tx & Rx indicate a problem with the fiber
  • Auxiliary port can be : Bi-directional RS422 or RS232 or Exterenal 2 Audio or External 8 Forward Audio or contact closure

Why not buy this Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit today?

Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit Specification:

*All Specifiactions Subject to Change Without Notice

  • HD-SDI Input

HD-SDI, SD-SDI, or DVB-ASI (ASI only for specific model-please call)

0 - 1.5 Gbps Serial Digital Signal

  • Number of Input

 8x HD-SDI (BNC)
 1x RS-485
 2x Auxiliary (choice of External Audio /RS422/RS232)

1x 10/100 Ethernet Full duplex (RJ45 connector)

  • Signal Level

> 380mVp-p

  • Impedance

75ohm

  • Connector

BNC

  • Distance

20Km  (40, 60, 80, 100Km - specific models only)

  • Mini box

25 × 16 × 10

  • Power Supply

 130 - 260 VAC @ 50-60 Hz

  • Power Consumption

 <10W

  • Temperature

 0 to +70 Degree

  • Humidity

0 to 95%

  • Connector

 ST/PC  or  ( SC/PC  or FC/PC or LC PC or SC/APC or ST/APC or LC/APC) by request

  • Optical Channels

TDM or CWDM type 

  • RH

Non-condensing

  • LED Status Indicator Lights

Why not buy this Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit today?

Thor Broadcast F-M8SD-ET-TxRx User Manual

How to Connect HDMI RF Petit to PC Via Ethernet

Why not buy this Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI + Ethernet over single fiber Transmission Kit today?

Can this kit carry eight independent SD/HD‑SDI signals at full rate?

A: Yes; the kit transports up to eight full‑rate HD‑SDI (1.5 Gbps) or lower SDI signals with each channel isolated from the others.

Will this kit also carry Ethernet together with the SDI channels?

A: Yes; it simultaneously transports 10/100 Ethernet full‑duplex alongside the SDI channels over the same single fiber.

Does the transmitter accept SDI formats other than HD‑SDI?

A: Yes; the transmitter inputs support any serial digital signal up to HD‑SDI, including SD‑SDI and DVB‑ASI where applicable.

Can embedded audio and ancillary SDI data be carried end‑to‑end?

A: Yes; the unit transports embedded audio channels and SDI ancillary data within each SDI channel.

Does the product provide a return path for remote control serial links?

A: Yes; the kit includes a return‑path serial RS‑485 channel for controlling equipment at the transmitter end.

What fiber connector types and optical channel options are offered?

A: Connector types are available by request and include ST/PC, SC/PC, FC/PC, LC/PC, SC/APC, ST/APC, and LC/APC; optical channels can be TDM or CWDM type.

Are there link/alarm indicators to show fiber problems?

A: Yes; both transmitter and receiver have link alarm indicators to show a problem with the fiber.

What signal level and impedance does the SDI input expect?

A: The SDI input signal level is listed as greater than 380 mVp-p with a 75 ohm impedance.

Can I use this kit to extend SDI and Ethernet over a single fiber run?

A: Yes; it extends SDI channels and 10/100 Ethernet full‑duplex simultaneously over a single fiber strand.

Will each SDI channel behave like a standalone feed for embedded audio and data?

A: Yes; each SDI channel carries its own embedded audio and ancillary data and operates independently thanks to TDM.

Do both the transmitter and receiver show a fiber link failure?

A: Yes; both Tx and Rx include link alarm indicators to show a fiber problem.

Is the listed power input range present for this unit?

A: The product listing shows a power supply range of 130–260 VAC at 50–60 Hz.

Why not buy this Thor Broadcast F-M8SD-ET-TxRx 8 SD/HD-SDI Transmission Kit from HDTV Supply today?