Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI TX and RX Kit

Thor Broadcast

Was: $6,594.00
Now: $5,495.00
SKU:
Thor-F-M8SDI-Tx/Rx
Condition:
New
Availability:
In Stock
1:
8 SDI / HDSDI Over 1 Fiber Optical Transmission Multiplexer
2:
8 Ch HD-SDI Over Fiber Kit
3:
Dual Aux for Analog Audio
4:
RS422/485/232 Data
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
1-Year Warranty

This Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km. Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI. The F-M8SDI platform delivers more functionality and performance of SDI to Fiber than has ever been available on off the shelf equipment.  

Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate.This Unit provides a multiple SDI over Fiber channels, each one carries their own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology.

The 8 channel fiber multiplexer platform offers the same 5 pin Aux port custom signal options as the two and four channel units.  However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure.

Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Features:

  • Supports 8 Full HD-SDI @ 1.5Gbps or lower SDI
  • Transports embedded audio channels as well as SDI ancillary data
  • Return path serial RS-485 channel for controlling equipment on Tx end
  • Link alarm indicators on both Tx & Rx indicate a problem with the fiber

Why not buy this Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?

Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Specifications:

HD-SDI Input

HD-SDI, SD-SDI,  (ASI supported only on the F-8ASI-TX, F-8ASI-RX CWDM model)

0 - 1.5 Gbps Serial Digital Signal

Number of Input  8 SDI
 1 RS-485
 2 Auxiliary 
Signal Level > 380mVp-p
Impedance 75Ω
Connector BNC
Distance 20Km (40, 60, 100Km Available )
Mini box 25×116×110
Power Supply  130 - 260 VAC @ 50-60 Hz
Power Consumption  <10W
Temperature  0 to +70 Degree
Humidity 0 to 95%
Connector ST/PC or  ( FC/PC or SC/PC or SC/APC optional)

Optical Channels

TDM Multiplexing

RH

Non-condensing

Why not buy this Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?

What SDI signal types and data rates does this kit support?

A: It supports serial digital signals up to HD‑SDI (including SD‑SDI) at up to 1.5 Gbps per channel.

Does the system preserve embedded audio and ancillary SDI data?

A: Yes—each SDI channel transports embedded audio and SDI ancillary data end-to-end.

Are the SDI channels isolated from each other?

A: Yes—each SDI channel is fully isolated and operates independently at the full 1.5 Gbps rate.

What kinds of signals can the Aux ports carry and how are they configurable?

A: The two independent Aux links can be configured to carry up to four channels of bi‑directional analog audio, one or two full‑duplex RS‑232/422 links, or four contact‑closure lines each.

How does this product multiplex multiple SDI channels onto fiber?

A: It uses a TDM/CWDM‑style multiplexing method so each channel carries its own embedded audio and ancillary data independently.

What fiber connector options are available on the Tx/Rx units?

A: The units ship with ST/PC and optionally can be fitted with FC/PC, SC/PC or SC/APC connectors.

Does the kit provide link/alarm indicators for fiber problems?

A: Yes—both transmitter and receiver include link alarm indicators to show a fiber problem.

Is there a return path for control signals and what type is it?

A: Yes—there is a return path serial RS‑485 channel for controlling equipment at the transmitter end.

What AC mains range does the unit accept?

A: The power supply accepts 130–260 VAC at 50–60 Hz.

Why not buy this Thor Broadcast F-M8SDI-Tx/Rx 8Ch HD-SDI TX and RX Kit from HDTV Supply today?