Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI TX and RX Kit

Thor Broadcast

Was: $1,618.80
Now: $1,349.00
SKU:
Thor-F-M2SDI-Tx/Rx
Condition:
New
Availability:
In Stock
1:
2 SDI or HDSDI Fiber Optic MINI Extender
2:
Supports 2 Full HD-SDI @ 1.5Gbps
3:
Transports 2ch Embedded Audio
4:
Return Path Serial RS-485 Channel
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty
ADD OPTIONS:

This Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km are designed to increase the range of digital SD-SDI or HD-SDI video signals over singlemode or multimode fiber optic cable.  SDI is normally carried over coax cable on BNC connectors, however the maximum cable distance is limited to around 100 meters. Similar to Rattler products, the Thor SDI extenders increase this distance to more than 80 miles by using lasers to send the data over fiber optic cable. 

Compact HD-SDI transmitter and receiver kits are available with many different options for different fiber distances and different types of audio options.  Models are available for 10, 20, 40, or 80 km.  Most models use a combination of 1310nm and 1550nm optics for the forward and reverse path.  Contact Thor for more available options.

Thor F-M2SDI fiber optic SDI transmitters and receivers use locking type ST or FC fiber connectors and BNC video cables to ensure that any cable is not accidentally pulled out of the device once the equipment is installed.  Adapter jumpers are available by request for most types of fiber cables if a different fiber connector type is required. Options are available for both singlemode or multimode fiber, and a range of transmitter power options can be selected.

Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Features:

  • Supports 2 Full HD-SDI @ 1.5Gbps or lower SDI digital video
  • Transports 2ch embedded audio channels as well as SDI ancillary data on each SDI
  • Return path serial RS-485 channel for controlling equipment on Tx end
  • Link alarm indicators on both Tx & Rx indicate a problem with the fiber

Why not buy this Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?

Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Specifications:

HD-SDI Input

HD-SDI, SD-SDI, or (DVB-ASI suported only on F-2ASI-TX/RX CWDM models)

0 - 1.5 Gbps Serial Digital Signal (3G SDI avialable)

Number of Input  2 SDI
 1 RS-485
 1 Auxiliary 
Signal Level > 380mVp-p
Impedance 75Ω
Connector BNC
Distance 20Km (40,60,80.100Km  - model dependent ) 
Mini box 25×116×110
Power Supply  130 - 260 VAC @ 50-60 Hz
Power Consumption  <10W
Temperature  0 to +70 Degree
Humidity 0 to 95%
Connector ST/PC ( SC/PC or FC/PC or SC/APC available on request)
Optical Channels TDM Multiplexing
RH
AUDIO

Non-condensing

Unit supports  2 channels of embedded SDI audio or 2ch Analog Audio if  AUX Audio cards are used.

The unit has embedded audio or external analog, Not both at the same time,

Why not buy this Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?

Does the kit transport embedded SDI audio?

A: Yes — the unit supports two channels of embedded SDI audio.

Can I use external analog audio instead of embedded audio?

A: Yes — the unit can use 2 channels of external analog audio, but it supports either embedded audio or external analog audio, not both at the same time.

Is there a return path for remote control signals?

A: Yes — the kit includes a return-path serial RS-485 channel for controlling equipment at the transmitter end.

What fiber connector types does the kit use?

A: The units use locking-type ST/PC fiber connectors by default, with SC/PC, FC/PC, or SC/APC available on request.

What optical fiber types and distance options are supported?

A: The kit is available for singlemode or multimode fiber and this listing specifies a 20 km singlemode variant; models are also offered for longer distances by model.

Does the kit indicate a fiber link failure?

A: Yes — both the transmitter and receiver include link alarm indicators that show a problem with the fiber.

What AC power range and power consumption does the unit use?

A: The unit accepts 130–260 VAC at 50–60 Hz and consumes under 10 W.

Does the kit carry SDI ancillary data and embedded audio together?

A: Yes — it transports embedded audio channels and SDI ancillary data on each SDI signal.

Why not buy this Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI TX and RX Kit from HDTV Supply today?