This Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator has been repeatedly called the fastest encoder used for live video applications by dozens of AV Professional integrators in the USA. SDI is the professional choice for any high end camera or digital video feed, where only the highest quality video is of the utmost importance.
The key functionality of the low latency encoding process has been able to upgrade any headend to provide live ultra-fast HD video distribution throughout any infrastructure. Reaching encoding times as low as 70ms up to 250ms is everything you need for a PRO-DVB encoder used with live Camera feeds. This encoder modulator will input 1, 2, or 4 channels of any SD/HD-SDI feed and produce a ATSC, ASI, or IPTV stream for any distribution or contribution feed. Currently being used in dozens of professional and collegiate stadiums and arenas; this multi-channel SDI unit is a low cost powerhouse that has been lauded as a game changer with its impeccable encoding picture quality.
This dynamic unit can be just an encoder, a modulator, an IPTV server, or all 3 at once. The SDI-ATSC unit will output in MPEG-2 or H.264 for easy distribution to any location in 720p, 1080i, or 1080p60. Combining channels or stacking units is easy with RF inputs and outputs on every unit, including a DVB-ASI input and output for headend contribution
Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator Features:
- 70 ms Low Latency encoding feature for low delay display
- 1x HD-SDI Input and 1x ASI Input / ATSC, IPTV, & ASI Output
- Distribute or Broadcast any live HD-SDI digital video source
- Combination Encoder, Modulator, IPTV Server, & ASI Mux
- Controlled through web server on separate network port
- Encodes in MPEG-2 or H.264 video codecs at 0.5 - 19 Mbps
Why not buy this Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator today?
Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator Specifications:
- HD-SDI Formats: 1080p, 1080i, 720p
- Frame Rates: 50, 59.94, 60 fps
- Video Codecs: MPEG-2, H.264
- Video Bit Rates: 0.5 - 19.5 Mbps, CBR or VBR
- Audio Codecs: MPEG1 Layer2, MPEG2 Layer2, AAC, Dolby AC3
- Audio Bit Rates: 64 - 32 kbps (6 steps)
- ASI Input: SPTS, MPTS (up to 80Mbps)
- ASI Output: SPTS, MPTS (up to 80Mbps)
- RF Output: 8VSB (19 Mbps)
- IP Management: HTTP Webserver port 80
- IPTV Streaming: RTP, RTSP, UDP; Unicast & IGMP Multicast
- Power Input: 100-240 VAC Auto Switching 20W
- Dimensions: 482 x 300 x 44 mm
- Weight: 3.75 kg
- Operating Temperature: 0 - 45 °C
Why not buy this Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator today?
Thor Broadcast H-1SDI-ATSC-IPLL 1-Ch HD-SDI to ATSC Encoder Modulator Manual
Why not buy this Thor Broadcast H-1SDI-ATSC-IPLL 1-Channel HD-SDI to ATSC Encoder Modulator today?
How many SDI sources can the H-1SDI-ATSC-IPLL accept?
A: The H-1SDI-ATSC-IPLL accepts one SDI video source. Its BNC input supports HD-SDI and 3G-SDI, with supported formats up to 1080p60.
Which video formats and encoding codecs are supported?
A: Supported formats include 720p, 1080i, and 1080p at 50, 59.94, and 60 Hz. MPEG-2 and H.264 encoding are available, but 1080p encoding requires H.264. Match the selected codec and format to the receiving equipment's decoding capabilities.
Can ATSC RF, IPTV, and ASI outputs operate at the same time?
A: Yes. The unit can function as an encoder, ATSC modulator, and IPTV server simultaneously, with ATSC RF, IPTV, and ASI outputs available for distribution or contribution feeds.
Which IPTV delivery methods does it support?
A: IPTV output supports UDP, RTP, and RTSP, with unicast and IGMP multicast delivery. The manufacturer identifies the IPTV stream as MPEG-TS MPTS and places streaming on a network port separate from management.
How is the encoder modulator configured over a network?
A: Configuration is available through a browser-based management interface on a dedicated network port. The HTTP management server uses port 80, keeping management access separate from IPTV streaming traffic.
What RF modulation and tuning range are available?
A: The RF output uses ATSC-compatible 8VSB modulation with a 19 Mbps programming capacity. The documented tuning range is 30–960 MHz in 1 kHz steps, with an adjustable RF output level of 5–35 dBmV.
Can an existing ASI transport stream be integrated into the outputs?
A: Yes. The unit includes an ASI input that accepts SPTS or MPTS transport streams, along with an ASI output. Its multiplexer supports selecting incoming programs by PID and muxing selected programs to the outputs.
What AC power does the H-1SDI-ATSC-IPLL require?
A: The unit accepts 100–240 VAC with automatic switching. Documented power consumption is approximately 20 W.
Is this model suitable for distributing a live camera feed around a stadium or arena?
A: Yes. The H-1SDI-ATSC-IPLL is intended for live SDI video distribution and includes the low-latency encoding option identified by the LL suffix. It is a fit for a single-camera feed, but encoding delay should not be treated as the complete camera-to-screen delay.
Can I add a local SDI video channel to a coax system carrying antenna TV channels?
A: Yes. Its ATSC 8VSB output is designed for applications that combine locally generated programming with an off-air antenna lineup. This matches the RF modulation used by North American ATSC tuners rather than introducing a QAM channel into that lineup.
Can one SDI feed serve both coax-connected TVs and network video receivers?
A: Yes. The encoder can distribute the same SDI source through ATSC RF and IPTV at the same time, allowing one source to serve both distribution paths. Receiving equipment must support the selected signal format and codec.