This Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator has been repeatedly called the fastest encoder used for live video applications by dozens of AV Professional integrators in the USA. SDI is the professional choice for any high end camera or digital video feed, where only the highest quality video is of the utmost importance.
The key functionality of the low latency encoding process has been able to upgrade any headend to provide live ultra-fast HD video distribution throughout any infrastructure. Reaching encoding times as low as 70ms up to 250ms is everything you need for a PRO-DVB encoder used with live Camera feeds. This encoder modulator will input 1, 2, or 4 channels of any SD/HD-SDI feed and produce a ATSC, ASI, or IPTV stream for any distribution or contribution feed. Currently being used in dozens of professional and collegiate stadiums and arenas; this multi-channel SDI unit is a low cost powerhouse that has been lauded as a game changer with its impeccable encoding picture quality.
This dynamic unit can be just an encoder, a modulator, an IPTV server, or all 3 at once. The SDI-ATSC unit will output in MPEG-2 or H.264 for easy distribution to any location in 720p, 1080i, or 1080p60. Combining channels or stacking units is easy with RF inputs and outputs on every unit, including a DVB-ASI input and output for headend contribution
Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator Features:
- 70 ms Low Latency encoding feature for low delay display
- 2x HD-SDI Input and 1x ASI Input / ATSC, IPTV, & ASI Output
- Distribute or Broadcast any live HD-SDI digital video source
- Combination Encoder, Modulator, IPTV Server, & ASI Mux
- Controlled through web server on separate network port
- Encodes in MPEG-2 or H.264 video codecs at 0.5 - 19 Mbps
Why not buy this Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator today?
Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator Specifications:
- HD-SDI Formats: 1080p, 1080i, 720p
- Frame Rates: 50, 59.94, 60 fps
- Video Codecs: MPEG-2, H.264
- Video Bit Rates: 0.5 - 19.5 Mbps, CBR or VBR
- Audio Codecs: MPEG1 Layer2, MPEG2 Layer2, AAC, Dolby AC3
- Audio Bit Rates: 64 - 32 kbps (6 steps)
- ASI Input: SPTS, MPTS (up to 80Mbps)
- ASI Output: SPTS, MPTS (up to 80Mbps)
- RF Output: 8VSB (19 Mbps)
- IP Management: HTTP Webserver port 80
- IPTV Streaming: RTP, RTSP, UDP; Unicast & IGMP Multicast
- Power Input: 100-240 VAC Auto Switching 20W
- Dimensions: 482 x 300 x 44 mm
- Weight: 3.75 kg
- Operating Temperature: 0 - 45 °C
Why not buy this Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator today?
Thor Broadcast H-2SDI-ATSC-IPLL 2-Ch HD-SDI to ATSC Encoder Modulator Manual
Why not buy this Thor Broadcast H-2SDI-ATSC-IPLL 2-Channel HD-SDI to ATSC Encoder Modulator today?
Which video formats and frame rates does it accept?
A: It accepts 1080p, 1080i, and 720p formats and supports 50, 59.94, and 60 frames per second.
Which video codecs and bitrate range are supported for output?
A: The encoder supports MPEG-2 and H.264 video codecs with bitrates from 0.5 to 19.5 Mbps (CBR or VBR).
What audio codecs and bit rates can I use with this unit?
A: It supports MPEG-1 Layer II, MPEG-2 Layer II, AAC, and Dolby AC3 audio codecs with selectable audio bit rates listed between 64 and 32 kbps in six steps.
Can this device output ASI streams and what capacity does ASI support?
A: Yes — it provides ASI input and output supporting SPTS and MPTS at up to 80 Mbps.
Does it provide RF output for ATSC and what modulation/bitrate is specified?
A: It provides an RF output using 8VSB with a 19 Mbps data rate for ATSC.
Does the unit support IPTV streaming and which protocols are supported?
A: Yes — the unit streams IPTV using RTP, RTSP, and UDP and supports both unicast and IGMP multicast.
Can the device function as encoder, modulator, and IPTV server at the same time?
A: Yes — the product can operate as an encoder, a modulator, an IPTV server, or any combination of those simultaneously.
How is the unit managed over IP and which network port is used for the web interface?
A: You manage the unit via an HTTP webserver using IP management on port 80.
What are the power requirements for installing this unit in a rack?
A: It uses 100–240 VAC auto-switching power and lists 20W as the power figure.
Can I combine channels or stack multiple units for larger headends?
A: Yes — the product notes combining channels or stacking units is easy and mentions RF and DVB-ASI inputs/outputs to assist headend contribution.
What are the unit's physical dimensions and weight for rack planning?
A: The chassis measures 18.98 x 11.81 x 1.73 inches (18.98" x 11.81" x 1.73") and weighs 8.27 pounds (8.27 pounds).
Which IPTV delivery styles are supported if I need multicast distribution?
A: It supports both unicast and IGMP multicast delivery over RTP, RTSP, or UDP.