This Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator system for digital satellite news gathering or DVB-S2 satellite transport. Designed for use in DSNG trucks or installed in satellite broadcast fly pack enclosures. Provides full HD encoding of 1 channel of live video from any HD-SDI signal source. The chassis also provides an ASI input to multiplex externally encoded programs into the DVB-S2 RF carrier output for added flexibility. For backwards compatibility, both DVB-S2 and DVB-S modulation protocols are supported on the RF output. The BISS satellite encryption standard allows secure transmission of live video by making the feed impossible to decode without a pre shared key.
The chassis supports most Thor Broadcast single depth encoder cards, with support for every major video signal format. All settings and configuration options are available via the front panel keyboard and LCD, as well as through a standard web server based network management system. For powering the uplink antenna the unit has the option of providing 24VDC over the coax output, this feature can be enabled or disabled through either management interface. This system will accept programming via ASI and encode 1 channel of full HD video at 1080p60 from any HD-SDI source.
Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator Features:
- 1x HD-SDI Input and 1x ASI Input / DVB-S/S2 & ASI Output
- Distribut ASI or Uncompressed Video over Satellite RF
- Combination Encoder, Modulator, & ASI Mux
- Controlled through web server on separate network port
- Encodes in MPEG-2 or H.264 video codecs at 0.5 - 19 Mbps
Why not buy this Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator today?
Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator Specifications:
- HD-SDI Formats: 1080p, 1080i, 720p
- Frame Rates: 50, 59.94, 60 fps
- Video Codecs: MPEG-2, H.264
- Video Bit Rates: 0.5 - 19.5 Mbps, CBR or VBR
- Audio Codecs: MPEG1 Layer2, MPEG2 Layer2, AAC
- Audio Bit Rates: 64 - 32 kbps (6 steps)
- ASI Input: SPTS, MPTS (up to 80Mbps)
- ASI Output: SPTS, MPTS (up to 80Mbps)
- RF Output: DVB-S, DVB-S2
- IP Management: HTTP Webserver port 80
- Power Input: 100-240 VAC Auto Switching 35W
- Dimensions: 482 x 300 x 44 mm
- Weight: 3.75 kg
- Operating Temperature: 0 - 45 °C
Why not buy this Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator today?
Thor Broadcast H-1SDI-DVBS2 1-Ch HD-SDI to DVB-S2 Encoder Modulator Manual
Why not buy this Thor Broadcast H-1SDI-DVBS2 1-Channel HD-SDI to DVB-S2 Satellite Encoder Modulator today?
Does the unit support 1080p60 input and full‑HD encoding?
A: Yes — the encoder accepts 1920×1080 60P and provides full HD encoding.
Which video codecs can it encode?
A: It encodes video in MPEG‑2 and H.264 (AVC) formats.
What video bit‑rate range can I set for the encoder?
A: You can set video bit rates in the range shown as 0.5 to 19.5 Mbps.
What RF frequency and symbol‑rate ranges are available for the modulator?
A: RF output frequency is adjustable from 950 to 2150 MHz and symbol rate is adjustable from 0.05 to 20.0 Msps.
Can I apply BISS scrambling, and which BISS modes are supported?
A: Yes — the encoder supports BISS scrambler with Mode 1 and Mode E, including key entry options described for each mode.
Can I control and configure the unit locally and over the network?
A: Yes — you can operate and change all settings from the front‑panel LCD/keyboard and from the web‑based NMS on the Ethernet data port.
Does the unit provide firmware upgrade and configuration save/restore over the web GUI?
A: Yes — the web NMS supports firmware update plus saving, restoring, and factory reset of device configuration.
Can I use this encoder in a satellite newsgathering (DSNG) truck or a fly‑pack uplink?
A: Yes — the product is designed for DSNG trucks and satellite broadcast fly pack enclosures.
Can I manage audio/video program scrambling and set program PIDs through the web GUI?
A: Yes — the NMS GUI exposes encoder program lists, allows PID/program selection, and lets you set BISS scrambling parameters.