Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable

Thor Broadcast

Was: $6,594.00
Now: $5,495.00
SKU:
Thor-F-4SDI-3G-GET-TxRx-RM
UPC:
793132854312
Condition:
New
Availability:
In Stock
1:
Compatibility With CWDM Bands
2:
Real-Time LED Indicators
3:
Not Addressable With IP Address
4:
Reclocking For SDI
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty

This Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable is a flexible system that allows customers to send 4 unique 3G SDI video signals and bi-directional Gigabit Ethernet over a single fiber link, with distances 20,40,80 and 120Km ( model dependent). This makes it perfect for real-time applications like live broadcast or video transmission over long distances.

Send Video and Extend LAN Simultaneously: You can use this system to transport live video (3G-SDI) from Point A to Point B, while at the same time extending your LAN network over the same fiber connection. This means you can connect computers, routers, or any IP-enabled devices alongside your video signals.

Example Use Case: For instance, at a remote location, a video camera can send live footage back to the studio (3G-SDI), while a PC or networked device can send or receive data (Gigabit Ethernet) over the same fiber. Both video and data travel securely and efficiently over the same link.

Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable Features:

  • Supports Serial Digital Signals up to 3.0 Gbps: Transports 4 unique 3G SDI video signals and bi-directional Gigabit Ethernet over a single fiber, making it ideal for simultaneous video and data transmission.
  • Transmitter and Receiver Kit: The F-4SDI-3G-GE-TXRX comes as a complete kit, including both the transmitter (Tx) and receiver (Rx) units, ensuring seamless end-to-end video and Ethernet transport.
  • Single Optical Fiber for Video and Ethernet: Available with internal optics for use with a single optical fiber, simplifying installation and reducing costs by combining both video and Ethernet transport on the same link.
  • Compatibility with CWDM Bands: Works with standardized CWDM channels, ensuring compatibility with other CWDM-based systems like Python. This allows easy integration into existing networks or systems.
  • Passes SDI Embedded Audio and Ancillary Data: Transports SDI embedded audio and all ancillary data along with the video signal, providing a comprehensive solution for professional broadcast and live production applications.
  • Input Equalization and Reclocking for SDI: Features input equalization and reclocking for SDI video, ensuring clean, stable video signals on all buffered outputs—even over long distances.
  • Customizable for Bi-Directional Transport: The system can be configured for bi-directional transport of up to 16 total channels, allowing flexibility to handle multiple video and Ethernet signals in both directions over the same fiber.
  • Real-Time LED Indicators: Equipped with real-time status LED indicators for input signal detect, optical link, and Ethernet connectivity, making it easy to troubleshoot and monitor system performance.
  • Ethernet Port – Works as an unmanaged pass-through transceiver. It is not addressable with an IP address and essentially simulates an Ethernet extension cable over fiber, providing seamless Ethernet transport without the need for network configuration.
  • Rackmount Chassis with Power Supplies

Why not buy this Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable from HDTV Supply today?

Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable Specification:

*All Specifications Subject to Change Without Notice
Optical Characteristics

 

  • Wavelength

1310 nm CWDM Band
1271nm, 1291nm, 1311nm, 1331nm
1351nm, 1371nm, 1411nm, 1431nm
1550 nm CWDM Band
1471nm, 1491nm, 1511nm, 1531nm
1551nm, 1571nm, 1591nm, 1611nm

  • Fiber Cable
Single Mode ONLY
  • Optical Data Rate
Up to 4.25 Gbps (Model Specific)
  • Optical Source
DFB Laser Module - CWDM
  • Optical Budget
15 dB - Standard
30 dB - Long Range
  • Fiber Connectors
ST/PC - Standard
Electrical Characteristics  
  • Input
Any Serial Digital Signal up to 3.0 Gbps
  • Input Level
1.00 V Peak to Peak
  • I/O Impedance
75 Ohm
  • Electrical Connectors

BNC - 75 Ohm

RJ45 Port – Supports 10/100/1000 Mbps Gigabit Ethernet Interface – Unmanaged
Mechanical/Environmental  
  • Dimensions (L x W x H)
480mm x 225mm x 88mm
  • Weight
8-15lb - Depending On Configuration
  • Temperature Range
Operating: -10C to + 55C
Storage: -30C to + 70C
  • Humidity Range
0 to 95%, non-condensing
  • Power
100 - 240 VAC Auto Switching PSU
10 - 30 Watt Depending On Configuration

Why not buy this Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable from HDTV Supply today?

Is the Ethernet link addressable or configurable as a managed interface?

A: No — the Ethernet port functions as an unmanaged pass-through transceiver and is not addressable with its own IP address.

Does the system support bi‑directional transport and how many channels can be configured?

A: Yes — the system can be configured for bi-directional transport and is documented as configurable to carry up to 16 total channels.

What fiber type and connector does this product require?

A: It requires single‑mode fiber and the product lists ST/PC as the standard fiber connector.

What optical budgets and optical data rates are documented?

A: The product lists optical budgets of 15 dB (standard) and 30 dB (long range), and an optical data rate up to 4.25 Gbps (model specific).

What physical size should I plan for in a rack?

A: Plan for rack-mountable units with external dimensions 18.90 inches x 8.86 inches x 3.46 inches (18.90 in x 8.86 in x 3.46 in).

What link distances are advertised and how are they qualified?

A: Advertised link distances are 20, 40, 80, and 120 km, and the product notes those are model‑dependent.

Do I need multimode fiber or single‑mode fiber for this product?

A: You need single‑mode fiber only; the product specifies single mode only for the fiber cable.

Why not buy this Thor Broadcast F-4SDI-3G-GET-TxRx-RM 4-Ch SD/HD 3G-SDI With Gigabit Ethernet Over Single Fiber -19 Inch Rack Mounatable from HDTV Supply today?