Thor Broadcast F-4SDI-B-TxRx 4 Bi-Directional SDI/HDSDI Transceiver

Thor Broadcast

Was: $7,794.00
Now: $6,495.00
SKU:
Thor-F-4SDI-B-TxRx
Condition:
New
Availability:
In Stock
1:
Supports 4- Bi-Directional Full HD-SDI @ 1.5Gbps
2:
Return Path Serial RS-485 Channel
3:
Transports Embedded Audio Channels
4:
Link Alarm Indicators
5:
Free USA Insured Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty

This Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver transport up to 4 full rate HD-SDI digital video signals in both directions at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface.

The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI. The F-M8SDI platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment.

Each of the 4 bi-directional HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology.

Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver Features:

  • Supports 4- bi-directional Full HD-SDI @ 1.5Gbps or lower SDI
  • Transports embedded audio channels as well as SDI ancillary data
  • Return path serial RS-485 channel for controlling equipment on Tx end
  • Link alarm indicators on both Tx & Rx indicate a problem with the fiber

Why not buy this Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver today?

Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver Specification:

*All Specifiactions Subject to Change Without Notice
HD-SDI Input


HD-SDI, SD-SDI,  (ASI supported only on the F-4ASI-TX, F-4ASI-RX CWDM model)
0 - 1.5 Gbps Serial Digital Signal
 

Number of Input  
8 SDI (4  SDI in ich direction)
 1 RS-485
 2 Auxiliary 
 
Signal Level
> 380mVp-p
 
Impedance
75ohm
 
Connector
BNC
 
Distance
20Km (40, 60, 100Km Available )
 
Mini box
25 × 16 × 10
 
Power Supply
130 - 260 VAC @ 50-60 Hz
 
Power Consumption  
<10W
 
Temperature
0 to +70 Degree
 
Humidity
0 to 95%
 
Connector
ST/PC or  ( FC/PC or SC/PC or SC/APC optional)
 

Optical Channels


TDM/CWDM type 
 

RH


Non-condensing
 

LED Status Indic

Why not buy this Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver today?

Thor Broadcast F-4SDI-B-TxRx 4 Bi-Directional SDI/HDSDI Transceiver Manual

How to Connect HDMI RF Petit to PC Via Ethernet

Why not buy this Thor Broadcast F-4SDI-B-TxRx 4 Bi - Directional SDI / HDSDI Over 1 Fiber Transceiver today?

Can this unit send and receive multiple HD‑SDI signals over one fiber strand?

A: Yes; the unit transports up to four full‑rate HD‑SDI (1.5 Gbps) digital video signals in both directions over a single fiber strand.

Will the transceiver carry embedded audio and SDI ancillary data?

A: Yes; it transports embedded audio channels and SDI ancillary data along with the video.

What SDI formats does the transmitter accept?

A: The transmitter accepts serial digital signals up to HD‑SDI, including SD‑SDI.

Are the four SDI channels isolated from each other and do they run at full rate?

A: Yes; each of the four bi‑directional HD‑SDI signals is fully isolated and operates at the full 1.5 Gbps data rate.

What auxiliary interfaces are available and what can they carry?

A: Dual Aux ports can add up to four analog bi‑directional audio channels, two full‑duplex RS‑232/422 links, or four contact‑closure lines per Aux interface.

Does the unit provide link/alarm indicators for the fiber connection?

A: Yes; link alarm indicators on both the transmitter and receiver report fiber problems.

What are the SDI electrical characteristics and connector type?

A: SDI signals use 75 ohm impedance, signal level greater than 380 mVp-p, and BNC connectors.

What optical connector options are listed for this transceiver?

A: Optical connector options listed include ST/PC, with FC/PC, SC/PC, or SC/APC available as options.

Do I need a special power source for this unit?

A: No special power source is required beyond a mains supply in the listed range; the unit accepts 130–260 VAC at 50–60 Hz.

How much power does this transceiver use?

A: Power consumption is listed as under 10 W.

Is there a serial control return path from the receiver to the transmitter?

A: Yes; a return‑path serial RS‑485 channel is provided for controlling equipment at the transmitter end.

If I need to plan rack space, are the product dimensions usable from this page?

A: No; the listed mini box dimensions are unclear on the page and can't be used for rack planning.

Why not buy this Thor Broadcast F-4SDI-B-TxRx 4 Bi-Directional SDI/HDSDI Transceiver from HDTV Supply today?